Tusonix a Subsidiary of CTS Electronic Components CER0001A

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

Frequency, in the context of electronic components, refers to the rate at which an alternating current or voltage changes direction per second. It is measured in Hertz (Hz), which represents one cycle per second. Frequency is a crucial parameter for various electronic components, such as capacitors, inductors, and resonators. It determines the component's ability to store or release energy, filter signals, and resonate at specific frequencies. Understanding the frequency characteristics of electronic components is essential for designing and optimizing electronic circuits.

Bandwidth, in the context of electronic components, refers to the range of frequencies over which a component can operate effectively. It is typically measured in Hertz (Hz) and indicates the component's ability to pass signals within a specific frequency range without significant attenuation or distortion. A higher bandwidth indicates a wider range of frequencies that the component can handle, while a lower bandwidth indicates a narrower range. Bandwidth is a crucial parameter for components such as amplifiers, filters, and communication systems, as it determines the frequency range over which they can perform their intended functions.

Filter Type refers to the specific type of electronic filter used in a circuit. Filters are designed to selectively pass or reject certain frequencies of an electrical signal.

Insertion loss is a measure of the power loss introduced by a component when it is inserted into a transmission line. It is typically expressed in decibels (dB) and is calculated as the ratio of the input power to the output power. Insertion loss can be caused by a variety of factors, including the component's resistance, capacitance, and inductance. It is an important parameter to consider when designing circuits, as it can affect the overall performance of the system.