Factory Lead Time
79 Weeks
Mounting Type
Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include:
* Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side.
* Surface-mount: Component is placed on the surface of the PCB and soldered in place.
* Press-fit: Component is pressed into place on the PCB without soldering.
* Socket: Component is inserted into a socket on the PCB, allowing for easy replacement.
The mounting type is determined by factors such as the component's size, shape, and power requirements.
Surface Mount
Package / Case
Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.
8-SOIC (0.154, 3.90mm Width)
Operating Temperature
Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.
-40°C~125°C
Part Status
Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.
Last Time Buy
Moisture Sensitivity Level (MSL)
Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.
2 (1 Year)
Terminal Finish
Matte Tin (Sn) - annealed
Subcategory
Operational Amplifier
Base Part Number
ISL28117
Number of Circuits
Number of Circuits refers to the number of independent signal paths within an electronic component. It indicates how many separate circuits or channels the component can handle simultaneously. For example, an operational amplifier with a Number of Circuits of 2 can amplify two separate input signals independently. This parameter is crucial for determining the component's functionality and its suitability for specific applications.
1
Slew Rate
Slew rate is a measure of how quickly an electronic component's output voltage can change in response to a change in its input voltage. It is typically expressed in volts per microsecond (V/µs). A higher slew rate indicates that the component can respond more quickly to changes in its input voltage, which can be important in applications where fast signal processing is required.
0.5V/μs
Amplifier Type
Amplifier Type refers to the classification of amplifiers based on their circuit configuration and the type of transistors or other active devices used.
General Purpose
Current - Input Bias
80pA
Voltage - Supply, Single/Dual (±)
4.5V~40V ±2.25V~20V
Gain Bandwidth Product
1.5MHz
Voltage - Input Offset
4μV
Current - Output / Channel
43mA
RoHS Status
ROHS3 Compliant
Description
The ISL28117, ISL28217, ISL28417, and ISL28417SEH are a family of very high precision amplifiers featuring low noise vs power consumption, low offset voltage, low bias current, and low temperature drift making them the ideal choice for applications requiring both high DC accuracy and AC performance. The combination of precision, low noise, and small footprint provides you with outstanding value and flexibility relative to similar competitive parts.
Features
Low input offset voltage
Superb offset voltage TC... 50μV, maximum
ISL28417SEH 110μV, maximum
Input bias current..0.6pV/C, maximum
ISL28417SEH 1μV/C, maximum
Input bias current TC.1nA, maximum
ISL28417SEH 5nA, maximum
Low current consumption15pA/C, maximum
Voltage noise440μΑ
Wide supply range...8nV/Hz
4.5V to 40V
Operating temperature range
-40°C to 125°C
ISL28417SEH -55°C to 125°C
Small package offerings in single, dual and quad
Pb-free (RoHS compliant)
No phase reversal
Applications
Precision instruments
Medical instrumentation
Power supply control
Active filter blocks
Thermocouples and RTD reference buffers
Data acquisition