Factory Lead Time
6 Weeks
Mounting Type
Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include:
* Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side.
* Surface-mount: Component is placed on the surface of the PCB and soldered in place.
* Press-fit: Component is pressed into place on the PCB without soldering.
* Socket: Component is inserted into a socket on the PCB, allowing for easy replacement.
The mounting type is determined by factors such as the component's size, shape, and power requirements.
Surface Mount
Package / Case
Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.
6-CLCC
Operating Temperature
Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Part Status
Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.
Active
Moisture Sensitivity Level (MSL)
Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.
1 (Unlimited)
Voltage - Supply
2.7V~5.5V
Supply Voltage
Supply Voltage is the voltage required to power an electronic component. It is typically measured in volts (V) and is specified in the component's datasheet. The supply voltage must be within the specified range for the component to function properly. If the supply voltage is too low, the component may not function at all. If the supply voltage is too high, the component may be damaged.
5V
Output Type
Output type refers to the type of signal or power that an electronic component can produce. It can be analog or digital, AC or DC, and can vary in voltage, current, or power levels. The output type is determined by the component's design and is crucial for matching it with other components in a circuit. Understanding the output type ensures proper signal processing, power delivery, and overall system functionality.
I2C
Supply Voltage-Max (Vsup)
5.5V
Supply Voltage-Min (Vsup)
2.7V
Bandwidth
Bandwidth, in the context of electronic components, refers to the range of frequencies over which a component can operate effectively. It is typically measured in Hertz (Hz) and indicates the component's ability to pass signals within a specific frequency range without significant attenuation or distortion. A higher bandwidth indicates a wider range of frequencies that the component can handle, while a lower bandwidth indicates a narrower range. Bandwidth is a crucial parameter for components such as amplifiers, filters, and communication systems, as it determines the frequency range over which they can perform their intended functions.
11Hz
Acceleration Range
Acceleration Range is the maximum acceleration that the component can withstand without being damaged. It is typically expressed in units of g's (multiples of the acceleration due to gravity). The acceleration range is important for components that are used in applications where they may be subjected to high levels of acceleration, such as in automotive or aerospace applications.
±8g
Sensitivity (LSB/g)
1024 (±8g)
Length
Length, in the context of electronic components, refers to the physical dimension of a component along its longest axis. It is typically measured in millimeters (mm) or inches (in). Length is a crucial parameter for determining the physical size and space requirements of a component on a printed circuit board (PCB) or other assembly. It also affects the component's electrical characteristics, such as inductance and capacitance, which can be influenced by the length of conductors or traces within the component.
3mm
Height Seated (Max)
1.3mm
RoHS Status
RoHS Compliant
MXC6244AU Overview
This product is manufactured by Memsic Inc. and belongs to the category of Motion Sensors - Accelerometers. The images we provide are for reference only, for detailed product information please see specification sheet MXC6244AU or the datasheet in PDF format. As a professional electronic components distributor, Zeano has five million electronic components available. Additionally, we have over 500,000 electronic components in stock ready for immediate shipment. If you have requirements, you can send us a quotation form to get the price of MXC6244AU. We attach great importance to our customers' purchasing experience and are willing to establish a long-term cooperative relationship with you. If you have any questions or requirements, please feel free to contact us.
-
Image
Part Number
Manufacturer
Factory Lead Time
Mounting Type
Package / Case
Surface Mount
Operating Temperature
Packaging
Feature
Part Status
Moisture Sensitivity Level (MSL)
Number of Terminations
Voltage - Supply
Terminal Position
Terminal Form
Number of Functions
Supply Voltage
Terminal Pitch
JESD-30 Code
Output Type
Supply Voltage-Max (Vsup)
Supply Voltage-Min (Vsup)
Bandwidth
Axis
Acceleration Range
Sensitivity (LSB/g)
Length
Height Seated (Max)
RoHS Status
Published
View Compare
-
MXC6244AU
6 Weeks
Surface Mount
6-CLCC
YES
-40°C~125°C TA
Tape & Reel (TR)
Sleep Mode
Active
1 (Unlimited)
6
2.7V~5.5V
QUAD
NO LEAD
1
5V
1.15mm
S-XQCC-N6
I2C
5.5V
2.7V
11Hz
X, Y
±8g
1024 (±8g)
3mm
1.3mm
RoHS Compliant
-
-
-
6 Weeks
Surface Mount
6-CLCC
YES
-40°C~85°C TA
Tape & Reel (TR)
Sleep Mode
Active
1 (Unlimited)
6
2.7V~5.5V
QUAD
NO LEAD
1
5V
1.27mm
S-XQCC-N6
I2C
5.5V
2.7V
11Hz
X, Y
±2g
-
3mm
1.3mm
RoHS Compliant
-
-
-
Surface Mount
6-TDFN
-
-20°C~70°C TA
Cut Tape (CT)
-
Discontinued
1 (Unlimited)
-
2.5V~5.5V
-
-
-
-
-
-
I2C
-
-
10Hz
X, Y
±2g
64
-
-
RoHS Compliant
2002