Mounting Type
Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include:
* Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side.
* Surface-mount: Component is placed on the surface of the PCB and soldered in place.
* Press-fit: Component is pressed into place on the PCB without soldering.
* Socket: Component is inserted into a socket on the PCB, allowing for easy replacement.
The mounting type is determined by factors such as the component's size, shape, and power requirements.
Surface Mount
Package / Case
Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.
56-TFSOP (0.240, 6.10mm Width)
Supplier Device Package
56-TSSOP
Operating Temperature
Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.
-40°C~85°C
Series
Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.
74AVC
Part Status
Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.
Obsolete
Moisture Sensitivity Level (MSL)
Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.
1 (Unlimited)
Voltage - Supply
1.65V~3.6V
Base Part Number
74AVC16836
Number of Circuits
Number of Circuits refers to the number of independent signal paths within an electronic component. It indicates how many separate circuits or channels the component can handle simultaneously. For example, an operational amplifier with a Number of Circuits of 2 can amplify two separate input signals independently. This parameter is crucial for determining the component's functionality and its suitability for specific applications.
20-Bit
Current - Output High, Low
24mA 24mA
Logic Type
Logic Type refers to the type of logic implemented by an electronic component, such as a logic gate or flip-flop.
Universal Bus Driver
Description
20-bit universal bus driver designed for low-voltage operation (1.65V to 3.6V)
True 24mA balanced drive at 3.3V
JOFF supports partial power-down operation
3.6V I/O tolerant inputs and outputs
Meets PC133 SDRAM Registered DIMM specifications
All outputs contain a patented DDC (Dynamic Drive Control) circuit to reduce noise without degrading propagation delay
Industrial operation: -40°C to 85°C
Packaging: 56-pin 240-mil wide plastic TSSOP (A)
Features
Low-voltage operation (1.65V to 3.6V)
True 24mA balanced drive at 3.3V
JOFF supports partial power-down operation
3.6V I/O tolerant inputs and outputs
Meets PC133 SDRAM Registered DIMM specifications
All outputs contain a patented DDC (Dynamic Drive Control) circuit to reduce noise without degrading propagation delay
Industrial operation: -40°C to 85°C
Packaging: 56-pin 240-mil wide plastic TSSOP (A)