Everlight 17-21/G6C-BM1N2B/3T

Luminous Color refers to the color of light emitted by an electronic component when an electric current passes through it. It is typically specified in terms of wavelength or color temperature. Common luminous colors include red, green, blue, white, and amber. The luminous color of a component is determined by the materials used in its construction and the design of the component itself.

Number of LED Lights refers to the quantity of individual light-emitting diodes (LEDs) present within an electronic component or device. It indicates the total number of LEDs integrated into the component, which determines the overall light output and illumination capabilities. This parameter is crucial for applications where specific lighting requirements or desired brightness levels need to be met.

Circuit Configuration describes the arrangement of components within an electronic circuit. It specifies how the components are connected to each other, forming a specific circuit topology. Different circuit configurations can result in different circuit behaviors, such as amplification, oscillation, or filtering. Common circuit configurations include common-emitter, common-collector, and common-base for transistors, and series, parallel, and bridge configurations for resistors and capacitors.

Size, in the context of electronic components, refers to the physical dimensions of the component. It is typically expressed in millimeters (mm) or inches (in). The size of a component is important for several reasons. First, it determines the amount of space that the component will occupy on a printed circuit board (PCB). Second, it can affect the component's performance. For example, larger components may have better heat dissipation than smaller components. Finally, the size of a component can affect its cost. Larger components are typically more expensive than smaller components.

Luminance Value (Light Intensity) is a measure of the brightness of a light source. It is expressed in units of candelas per square meter (cd/m2). The higher the luminance value, the brighter the light source. Luminance value is an important parameter for electronic components such as LEDs and displays, as it determines how bright the light source will be.

Main Wavelength (Typ) is a parameter that specifies the typical or average wavelength at which an electronic component, such as a laser diode or LED, emits light. It is typically measured in nanometers (nm) and represents the wavelength at which the component emits the highest intensity of light. This parameter is important for applications where the wavelength of the emitted light is critical, such as in optical communications or spectroscopy.

Forward Voltage (Vf) is a parameter that measures the voltage drop across a diode when it is conducting in the forward direction. It is the minimum voltage required to turn on the diode and allow current to flow. Vf is typically measured in volts (V) and is a key factor in determining the efficiency and performance of a diode in a circuit. A lower Vf indicates a more efficient diode, as it requires less voltage to operate.

Voltage Dc Reverse (Vr) (Maximum) is the maximum voltage that can be applied to the component in the reverse direction without causing damage. This parameter is important for components such as diodes and transistors, which are designed to allow current to flow in only one direction. If the reverse voltage exceeds the maximum rating, the component may be damaged or destroyed.

Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

Country of Origin for electronic components refers to the nation where the component was manufactured or assembled. It indicates the geographical location of the production facility. This information is crucial for various reasons.

Original Manufacturer (OM) refers to the initial producer of an electronic component. It indicates the company that designed and fabricated the component. The OM is often different from the company that sells or distributes the component. Knowing the OM is important for traceability, quality control, and warranty purposes. It allows users to identify the source of the component and contact the manufacturer directly for support or replacement.

Brand refers to the manufacturer or company that produces the electronic component. It indicates the origin and quality of the component. Different brands may have varying levels of reputation, reliability, and specialization in specific types of components. Choosing components from reputable brands can provide assurance of quality, performance, and support.

Height, in the context of electronic components, refers to the vertical dimension of the component. It is typically measured in millimeters (mm) or inches (in). Height is an important parameter to consider when designing and assembling electronic circuits, as it affects the overall size and form factor of the device. Components with a smaller height are often preferred for applications where space is limited, such as in portable devices or embedded systems.

Application is a parameter that specifies the intended use of an electronic component. It provides information about the specific function or purpose for which the component is designed. This parameter helps engineers and designers select the most appropriate component for their application, ensuring optimal performance and reliability.

Lens Color refers to the color of the lens used in an optoelectronic component, such as an LED or photodiode. It indicates the wavelength range of light that the lens is designed to transmit or receive. Different lens colors correspond to different wavelengths, allowing for specific applications. For example, red lenses are used for long-wavelength light, while blue lenses are used for short-wavelength light.