Bourns Inc. 78FR22K-RC

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

Number of Pins: Indicates the number of electrical connections available on the component. These pins are used to connect the component to other components or circuits on a printed circuit board (PCB). The number of pins determines the functionality and connectivity options of the component. It is important to ensure that the component has the correct number of pins for the intended application.

Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

Tolerance in electronic components refers to the allowable deviation from the specified value. It indicates the range within which the actual value of the component can vary while still meeting the manufacturer's specifications. Tolerance is typically expressed as a percentage of the nominal value, such as ±5% or ±10%. A lower tolerance indicates a tighter range of acceptable values, resulting in more precise and consistent performance.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

Current Rating is the maximum amount of current that an electronic component can safely handle without overheating or failing. It is typically expressed in amperes (A) or milliamperes (mA). Exceeding the current rating can damage the component and potentially create a safety hazard. The current rating is determined by the physical characteristics of the component, such as its size, material, and construction.

Inductance is a property of an electrical conductor that opposes changes in current flow. It is measured in henrys (H) and is represented by the symbol L. Inductance is caused by the magnetic field generated by the current flowing through the conductor. When the current changes, the magnetic field also changes, which induces an electromotive force (EMF) in the conductor. This EMF opposes the change in current flow.

Test Frequency refers to the frequency at which an electronic component is tested to ensure it meets its specified performance parameters. It is typically expressed in Hertz (Hz) and represents the frequency range over which the component is tested. This parameter is important for ensuring the component's reliability and performance under different operating conditions.

DC Resistance (DCR) is a measure of the resistance of an electrical component to the flow of direct current (DC). It is typically measured in ohms (Ω) and is an important parameter for understanding the behavior of electrical components. DCR can affect the efficiency, power consumption, and overall performance of a circuit. It is often used to characterize inductors, capacitors, and other components that have a resistive element.

Q @ Freq is a parameter that describes the quality factor of an electronic component at a specific frequency. It is a measure of the component's ability to store and release energy, and is typically expressed as a ratio of the component's reactance to its resistance. A higher Q factor indicates a more efficient component, with less energy loss. Q @ Freq is important for understanding the performance of electronic circuits, as it can affect factors such as bandwidth, selectivity, and stability.