CapXon SK220M050E070A

Ripple current is the alternating current (AC) component of the current flowing through a capacitor. It is caused by the charging and discharging of the capacitor as the AC voltage applied to it changes. The ripple current can cause the capacitor to heat up and can also lead to premature failure. The maximum ripple current that a capacitor can handle is specified in its datasheet.

Size, in the context of electronic components, refers to the physical dimensions of the component. It is typically expressed in millimeters (mm) or inches (in). The size of a component is important for several reasons. First, it determines the amount of space that the component will occupy on a printed circuit board (PCB). Second, it can affect the component's performance. For example, larger components may have better heat dissipation than smaller components. Finally, the size of a component can affect its cost. Larger components are typically more expensive than smaller components.

Pitch, in the context of electronic components, refers to the distance between the centers of adjacent pins or terminals on a component. It is typically measured in millimeters (mm) or inches (in). The pitch determines the spacing between components on a printed circuit board (PCB) and affects the overall size and density of the circuit. A smaller pitch allows for more components to be placed in a given area, but it also increases the risk of shorts and other manufacturing defects.

Installation Type refers to the method by which an electronic component is mounted onto a printed circuit board (PCB) or other substrate.

Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

Voltage - Rated refers to the maximum voltage that an electronic component can withstand without being damaged. It is typically specified in volts (V) and is an important parameter to consider when selecting components for a circuit. Exceeding the rated voltage can lead to component failure, so it is important to ensure that the voltage applied to a component does not exceed its rated voltage.

Accuracy refers to the closeness of a measured value to the true value. In electronic components, accuracy is typically expressed as a percentage of the full-scale range. For example, a component with an accuracy of ±2% would have a measured value that is within 2% of the true value. Accuracy is important in electronic components because it ensures that the component will perform as expected.

Capacity Value, in the context of electronic components, refers to the amount of electrical charge that a component can store. It is typically measured in Farads (F) and is a key parameter for capacitors, which are devices designed to store electrical energy. The capacity value determines the amount of charge that can be stored at a given voltage, and it affects the component's ability to smooth out voltage fluctuations, filter out unwanted frequencies, and store energy for later release.

Lead Quantity refers to the number of electrical connections or terminals on an electronic component. These leads provide a physical and electrical interface between the component and the circuit board or other components. The lead quantity is a crucial parameter as it determines the component's connectivity and functionality within the electronic system.

Lifetime @ Temp. refers to the time it takes for a component's performance to degrade by half at a specified temperature. It is a measure of the component's reliability and stability over time. A longer lifetime indicates a more reliable component that is less likely to fail prematurely. The temperature at which the lifetime is specified is important because temperature can significantly affect the degradation rate of electronic components.

Part Life Cycle (PLC) refers to the lifespan of an electronic component, from its introduction to its eventual obsolescence.

Country of Origin for electronic components refers to the nation where the component was manufactured or assembled. It indicates the geographical location of the production facility. This information is crucial for various reasons.

Original Manufacturer (OM) refers to the initial producer of an electronic component. It indicates the company that designed and fabricated the component. The OM is often different from the company that sells or distributes the component. Knowing the OM is important for traceability, quality control, and warranty purposes. It allows users to identify the source of the component and contact the manufacturer directly for support or replacement.

Brand refers to the manufacturer or company that produces the electronic component. It indicates the origin and quality of the component. Different brands may have varying levels of reputation, reliability, and specialization in specific types of components. Choosing components from reputable brands can provide assurance of quality, performance, and support.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

Height, in the context of electronic components, refers to the vertical dimension of the component. It is typically measured in millimeters (mm) or inches (in). Height is an important parameter to consider when designing and assembling electronic circuits, as it affects the overall size and form factor of the device. Components with a smaller height are often preferred for applications where space is limited, such as in portable devices or embedded systems.