Vishay Semiconductor Diodes Division VS-50WQ04FNTRPBF

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

Number of Pins: Indicates the number of electrical connections available on the component. These pins are used to connect the component to other components or circuits on a printed circuit board (PCB). The number of pins determines the functionality and connectivity options of the component. It is important to ensure that the component has the correct number of pins for the intended application.

Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

Speed, in the context of electronic components, refers to the rate at which the component can process or transmit data. It is typically measured in units of bits per second (bps), megabits per second (Mbps), or gigabits per second (Gbps). The speed of a component is determined by its internal design and the technology used to manufacture it. Faster components can handle more data in a given amount of time, which can improve the overall performance of a system.

Diode Type refers to the specific type of diode used in an electronic circuit. Diodes are semiconductor devices that allow current to flow in only one direction. Different types of diodes have different characteristics and applications.

Forward Current is the amount of electrical current that flows through a diode or transistor when it is in the forward-biased condition. In this condition, the positive terminal of the power supply is connected to the anode of the diode or the collector of the transistor, and the negative terminal is connected to the cathode or the emitter. The forward current is typically measured in milliamperes (mA) or amperes (A).

Application is a parameter that specifies the intended use of an electronic component. It provides information about the specific function or purpose for which the component is designed. This parameter helps engineers and designers select the most appropriate component for their application, ensuring optimal performance and reliability.

Average Rectified Current (IAR) is a parameter that measures the average value of the rectified current flowing through an electronic component. It is typically used to characterize diodes and other rectifying devices. IAR is calculated by taking the average of the absolute value of the rectified current over a specified period of time. It is expressed in units of amperes (A). A higher IAR indicates that the component is more efficient at rectifying current.